已发表论文

[1]    Wang, J.-H., Wang, J., Lu, Y., Du, M.-H., Han, F.-Z., Effects of single pulse energy on the properties of ceramic coating prepared by micro-arc oxidation on Ti alloy, Applied Surface Science, (2015) 324,p405-413.

[2]    Wang, J., Han, F., Simulation model of debris and bubble movement in electrode jump of electrical discharge machining, International Journal of Advanced Manufacturing Technology, (2014) 74(5-8),p591-598.

[3]    Wang, J.-H., Du, M.-H., Han, F.-Z., Yang, J., Effects of the ratio of anodic and cathodic currents on the characteristics of micro-arc oxidation ceramic coatings on Al alloys, Applied Surface Science, (2014) 292(5-8),p658-664.

[4]    Wang, J., Chen, W., Gao, F., Han, F., A new electrode sidewall insulation method in electrochemical drilling, International Journal of Advanced Manufacturing Technology, (2014) 75(1-4),p21-32.

[5]    Takino, H., Han, F., Cutting of polished single-crystal silicon by wire electrical discharge machining using anti-electrolysis pulse generator, Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014,(2014) 2,p59-62.

[6]    Wang, J., Han, F., Simulation model of debris and bubble movement in consecutive-pulse discharge of electrical discharge machining, International Journal of Machine Tools and Manufacture, (2014) 77,p56-65.

[7]    Wang, J., Chen, W., Han, F., Study on the magnetorheological finishing method for the WEDMed pierced die cavity, International Journal of Advanced Manufacturing Technology, (2015) 76(9-12),p1969-1975.

[8]    Wang, J., Han, F., Zhao, F., Improvement of EDM efficiency with a new adaptive control strategy, International Journal of Advanced Manufacturing Technology ,(2012) 62(9-12),p1025-1040.

[9]    Wang, J., Han, F.-Z., Lu, J.-M., Zhao, F.-L., Research on influence rules of electrode machining time on EDM efficiency, Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology ,(2012) 52(5),p652-656.

[10]  Wang, J., Han, F., Cheng, G., Zhao, F., Debris and bubble movements during electrical discharge machining, International Journal of Machine Tools and Manufacture ,(2012) 58,p11-18.

[11]  F.Han, F.AI, Y.Wang, Attempt at unitary magnetorheological finishing for a pierced die cavity， Proceedings of the Institution of Mechanical Engineers Part B-Journal of Manufacture(2010),224(6) ,p879-886.

[12]  Han, F., Zhang, J., Cheng, G., Takahito, I., Modeling of work piece removal rate on EDM,16th International Symposium on Electro machining, ISEM 2010,(2010),p 101-104.

[13]  Zhou, M., Han, F., Tang, B., The methodology of detecting dynamical properties of Electrical Discharge Machining (EDM) process towards building a timely varied linear predictive model,16th International Symposium on Electro machining, ISEM 2010,(2010),p 73-78

[14]  Zhou, M., Han, F., Meng, X., Chen, B., Analysis and control of electrical discharge machining (EDM) process, IEEM 2009 - IEEE International Conference on Industrial Engineering and Engineering Management,(2009),p 164-168.

[15]  F.Han, G.Cheng, F. Zhijing, Measurement of wire electrode temperature in WEDM, International Journal of Advanced Manufacturing Technology ,(2009), 41(9,10),p871-879.

[16]  M. Zhou, F.Han, W. Yongxain, Assessment of dynamical properties in EDM process-detecting signature of latent change to deleterious process in advance, International Journal of Advanced Manufacturing Technology,(2009), 44(3-4),p283-292.

[17]  M. Zhou, F.Han, W. Yongxain,  Assessment of the dynamical properties in EDM process-detecting deterministic nonlinearity of EDM process, International Journal of Advanced Manufacturing Technology ,(2009),44(1-2),p91-99.

[18]  M. Zhou, F.Han, Adaptive control for EDM process with a self-tuning regulator, International Journal of Machine Tools and Manufacture,(2009)，49(6),p462-469.

[19]  Han, F., Wang, Y., Zhou, M., High-speed EDM milling with moving electric arcs, International Journal of Machine Tools and Manufacture,(2009)，49(1),p20-24.

[20]  F.Han, G. Cheng, thermo-mechanical Analysis and Optimal Tension Control of Micro Wire Electrode, International Journal of Machine Tools and Manufacture, (2008),48(7-8): p922-931.

[21]  F. Han, P.Grangure,M. Kunieda, Improvement in accuracy in potential method for detecting EDM spark locations, Journal of Materials Processing Tech, (2008), 206(1-3), p328-332.

[22]  M.Zhou, F.Han, A time-varied predictive model for EDM process, International Journal of Machine Tools and Manufacture, (2008) 48, p 1668-1677.

[23]  F.Han, L. Chen, D. Yu: Basic study on pulse generator for micro-EDM, International Journal of Advanced Manufacturing Technology,(2007),33 (5-6),p474-479.

[24]  F.Han, J. Jiang, D. Yu, influence of discharge current on machined surface by thermo-analysis in WEDM, International Journal of Machine Tools and Manufacture ,(2007) ,47 (7-8), p1187-1196.

[25]  F.Han, J. Jiang, D. Yu,  Influence of machining parameters on surface roughness in finish  cut of WEDM, International Journal of Advanced Manufacturing Technology ,(2007) ,34 (5-6): p538-546.

[26]  F.Han, J.Zhang, Corner error cut of rough cutting in wire EDM, Precision Engineering,(2007)31,p331-336.

[27]  G. Cheng, F.Han, Z. Feng, Experimental determination of convective heat transfer coefficient in WEDM, International Journal of Machine Tools and Manufacture,(2007), 47, (11) , p1744-1751.

[28]  Lu, B.-H., Han, F.-Z., Cheng, H.-B., Chen, X.-M., Design of curved surface manufacture system with five DOF and its CAM, Guangxue Jishu/Optical Technique(2007),33,p185-189.

[29]  F.Han, Y.Yamada, Experimental attempts of sub-micrometer order size machining using micro-EDM, Precision Engineering, (2006) 30(2)，p123-131.

[30]  Han, F., Chen, L., Zhou, X., Study on the transistor type pulse generator for micro-EDM, Zhongguo Jixie Gongcheng/China Mechanical Engineering, (2006) 17(20)，p2094-2097.

[31]  Han, F., Tao, C., Zhou, X., Masanori, K. , Development of simulation system on WEDM first cut ,Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, (2006) 42(6)，p101-105.

[32]  Han, F., Cheng, G., Chen, X., Zhou, X., Kunieda, M., CAD/CAM software for manufacturing 3-D curved surfaces using WEDM, Qinghua Daxue Xuebao/Journal of Tsinghua University, (2005) 45(11)，p1472-1475.

[33]  F.Han, M. Kunieda, Development of Parallel Spark electrical discharge machining, Precision Engineering 28(2004)p65-72.

[34]  F. Han, S. Wachi, M. Kunieda, Improvement of Machining Characteristics of Micro-EDM Using Transistor Type Isopulse Generator and Servo Control, Precision Engineering, (2004),28,p378-385.

[35]  F. Han, M. Kunieda, T. Sendai, Y. Imai: High Precision Simulation of WEDM Using Parametric Programming, CIRP (2002) p165-168.

 

发明专利

[1]      一种电解加工过程中工件短路检测方法    韩福柱、陈伟（CN106312216A）

[2]      一种三维电铸加工方法及系统    韩福柱、王军华、应炜晟（CN105239110A）

[3]      群电极电解加工阵列孔的方法    韩福柱、陈伟（CN105014169A）

[4]      一种电化学加工用电极的双膜侧壁绝缘方法    韩福柱、王津、陈伟、高峰（CN103668380A）

[5]      一种非导电材料的电解电火花复合加工方法及装置       韩福柱、王津、陈伟（CN103231133A）

[6]      一种电火花线切割贯通形型腔模具的磁流变抛光方法    韩福柱、陈伟、王津（CN102962732A）

[7]      一种非导电材料的砂浆线切割加工装置及方法       韩福柱、王津、陈伟（CN103203506A）

[8]      一种非导电材料的电解电火花线切割加工装置及方法    韩福柱、王津、陈伟（CN103231134A）

[9]      一种电化学电极的侧壁绝缘方法       韩福柱、高峰、王津（CN102965708A）

[10]  一种电火花线切割加工电极丝温度检测装置    韩福柱、程刚（CN1858568）

[11]  一种模具及零件的整体式磁流变抛光方法       韩福柱、艾福超（CN100999062）

[12]  一种弯曲孔的电火花/电解加工方法及其装置   韩福柱、王用贤、周明（CN101015874）

[13]  一种直流动电弧电火花加工方法       韩福柱、王用贤（CN101112727）

[14]  一种电加工用防电化学杂散腐蚀的方法    韩福柱、陈伟（CN105033371A）